รศ.ดร. อนรรฆ ขันธะชวนะ

สังกัดองค์กร

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ผลงานตีพิมพ์

  

  

  

1 จาก 4

  

  

  

• ● Comparison of physical, mechanical, and optical properties between thermoplastic materials and 3-dimensional printing resins for orthodontic clear retainers; Siew Peng Neoh,aAnak Khantachawana, Rochaya Chintavalakorn, et al.; 2025; บทความในวารสาร
• ● Effect of post-processing on the surface, optical, mechanical, and dimensional properties of 3D-printed orthodontic clear retainers; Siew Peng Neoh, Anak Khantachawana, Peerapong Santiwong, et al.; 2025; บทความในวารสาร
• ● Enhancing the Tribological Properties of Bearing Surfaces in Hip Arthroplasty by Shot-Peening the Metal Surface; Chavarat Jarungvittayakon, Anak Khantachawana, Paphon Sa-ngasoongsong; 2024; บทความในวารสาร
• ● Influence of the Oxide Film on the Performance and Corrosion Resistance of TiNiCu Shape Memory Alloys as the Heat Engine Actuator; Aphinan Phukaoluan,Kasama Srirussamee, Anak Khantachawana, et al.; 2024; บทความในวารสาร
• ● Neuroprotective Potential of Photobiomodulation Therapy: Mitigating Amyloid-Beta Accumulation and Modulating Acetylcholine Levels in an In Vitro Model of Alzheimer’s Disease; Siriluk Thammasart, Poommaree Namchaiw, Kwanchanok Pasuwat, et al.; 2024; บทความในวารสาร
• ● Attenuation Aβ1-42-induced neurotoxicity in neuronal cell by 660nm and 810nm LED light irradiation; Siriluk Thammasart, Poommaree Namchaiw, Kwanchanok Pasuwat, et al.; 2023; บทความในวารสาร
• ● Bare Land Referenced Algorithm from Hyper-Temporal Data (BRAH) for Land Use and Land Cover Age Estimation; Sornkitja Boonprong and Anak Khantachawana; 2023; บทความในวารสาร
• ● CROSS-CULTURAL ENGINEERING PROJECT: ASSESSMENT OF ENGINEERING EDUCATION PROGRAM BY OUTCOMES, SELF AND PEER EVALUATION AND CAREER TRACKING; H. Hasegawa, M. Yamashita, S. Kongwat, et al.; 2023; Conference proceedings article
• ● Influence of pre-structure orientation on the linear viscoelastic limit of magnetorheological elastomers; Narongdet Sulatchaneenopdon, Hyoung-Won Son, Anak Khantachawana, et al.; 2023; บทความในวารสาร
• ● Investigation of surface hardness and roughness on formability of aluminum alloy sheet AA2024-T3 subjected to the shot peening process by silica shots; Jurarat SAWANGPAN, Sansot PANICH, Tanakorn JANTARASRICHA and Anak KHANTACHAWANA; 2023; บทความในวารสาร
• ● Mechanical and biological performance of biphasic calcium phosphate typed bone substitute for high tibia osteotomy; Panuwat Monviset, Anak Khantachawana, Parichart Naruphontjirakul
  ; 2023; Conference proceedings article
• ● Microstructure and mechanical properties of Ti-Zr alloys fabricated by two-step spark plasma sintering from TiH2 and ZrH2 powders; Kunpot Banjongaxsorn, Anak Khantachawana, Chihiro Watanabe, et al.; 2023; บทความในวารสาร
• ● Synthesis and Characterization of Silver –doped Hydroxyapatite-Coated Polyether ether ketone for Dental Applications; Tanawat Wailerdsak; Kamolchanok Ngamkham; Anak Khantachawana; 2023; Conference proceedings article
• ● A Novel Alveolar Distractor Incorporating Nickel–Titanium Alloy Springs: A Preliminary In Vitro Study; Sarun Chancharoen, Peerapong Santiwong, Dutmanee Seriwatanachai, et al.; 2022; บทความในวารสาร
• ● Effect of fine particle shot peening on surface friction of stainless steel and ceramic bracket slots; Tribumrungsuk, Pichamon; Khantachawana, Anak; Janyaprasert, et al.; 2022; บทความในวารสาร
• ● Effect of Heat-Treatment Temperature on Radial Force of Atrial Depressurized Device Made from Shape Memory Alloys for Heart Failure Treatment; Worawichitraphan N., Yingchoncharoen T., Meemook K., et al.; 2022; Book chapter abstract
• ● Effect of Nb Content and water quenching on microstructure and mechanical properties of Ti-Nb alloys fabricated by spark plasma sintering; Nattawood Suesawadwanid, Anak Khantachawanaม Kasama Srirussamee and Katsuyoshi Kondoh; 2022; บทความในวารสาร
• ● Effects of the secondary shot in the double shot peening process on the residual compressive stress distribution of Ti–6Al–4V; Goratouch Ongtrakulkij, Julathep Kajornchaiyakul, Katsuyoshi Kondoh, et al.; 2022; บทความในวารสาร
• ● Effects of the secondary shot in the double shot peening process on the residual compressive stress distribution of Ti–6Al–4V; Ongtrakulkij G., Khantachawana A., Kajornchaiyakul J., et al.; 2022; บทความในวารสาร
• ● Investigation of Microstructure, Residual Stress, and Hardness of Ti-6Al-4V after Plasma Nitriding Process with Different Times and Temperatures; Goratouch Ongtrakulkij, Julathep Kajornchaiyakul, Katsuyoshi Kondoh and Anak Khantachawana; 2022; บทความในวารสาร

ข้อมูลความเชี่ยวชาญ