Development of the hole position's minimum distance calculation in the L-die bending process
บทความในวารสาร
ผู้เขียน/บรรณาธิการ
กลุ่มสาขาการวิจัยเชิงกลยุทธ์
รายละเอียดสำหรับงานพิมพ์
รายชื่อผู้แต่ง: Kongiang S.; Jin M.; Thipprakmas S.
ผู้เผยแพร่: SAGE Publications
ปีที่เผยแพร่ (ค.ศ.): 2025
วารสาร: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (0954-4089)
นอก: 0954-4089
eISSN: 2041-3009
ภาษา: English-Great Britain (EN-GB)
บทคัดย่อ
Currently, several L-shaped bent part assemblies based on the hole assembly methods are being widely employed. Consequently, it is crucial to determine the hole position precisely and without distortion after bending. Although determining the minimum distance of the hole location (dmin) can help prevent hole distortion during the L-die bending process for hole diameter < 25 mm, dmin = 2t + r, and hole diameter ≥ 25 mm, dmin = 2.5t + r, where t = workpiece thickness and r = tool radius or bend radius. However, these determinations cannot be determined with accuracy. A main challenge in the current study is figuring out whether dmin is appropriate for the L-die bending process. Laboratory experiments and finite element analyses were used address this challenge. In contrast to previous formulas, the new dmin determination does not consider the workpiece thickness and bend radius as suggested in the past alone, but also the bend angle is mainly considered. Therefore, the suggested dmin determination in the past are overly specific, especially for bend angles greater than 90°. Application of the proposed formula decreases the error by approximately 33% and 65% during the determination of the minimum distance of hole in the cases of 120° and 150° bend angles, respectively. Therefore, it is imperative to define dmin in the L-die bending process to obtain the requisite accurate hole locations after bending, and the use of developed dmin is strictly recommended, especially for bend angles greater than 90°. © IMechE 2025.
คำสำคัญ
ไม่พบข้อมูลที่เกี่ยวข้อง
ติดต่อสอบถามเพิ่มเติมได้ที่