Evaluation of the Tribological Behavior of Coated Ti-6Al-4V Under Dry Sliding Conditions

Conference proceedings article

Authors/Editors

Author list: Thanawat Sivilai, Peeradon Thongkam, Kittithat Tipmongkhon, Natthapat Chuemsuk, Thumpapon Jaturaphompinyo and Nutthanun Moolsradoo

Publication year: 2025

Languages: English-Australia (EN-AU)

Titanium Nitride (TiN), Titanium Carbonitride (TiCN), and Diamond-Like

Carbon (DLC) were used to study the effects of film properties on the tribological properties

under dry condition of films prepared by Physical Vapor Deposition (PVD) process.

Titanium alloy Ti-6Al-4V was selected as the substrate material. The coefficient of friction

was measured using the Ball-on-Disk method with a tribometer operating at a rotational

speed of 3.14 cm/sec for 3,000 cycles under normal loads of 1N, 2N, and 5N. The results

indicate that the friction coefficient of all films decreased with increasing normal load from

1N to 5N. The DLC film had the lowest coefficient of friction of 0.38, 0.26 and 0.19 at 1N,

2N and 5N normal load, respectively, attributed to its high surface hardness and graphitelike

structure.

No matching items found.