Synthesis of Fe–Cu Alloys via Ball Milling for Electrode Fabrication Used in Electrochemical Nitrate Removal from Wastewater

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Naemchanthara K.; Limsuwan P.; Srirach P.; Somdock N.; Klongratog B.; Sakulkalavek A.; Hayeedah H.

ผู้เผยแพร่: MDPI

ปีที่เผยแพร่ (ค.ศ.): 2025

Volume number: 13

Issue number: 7

นอก: 22279717

eISSN: 2227-9717

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-105011611645&doi=10.3390%2Fpr13072232&partnerID=40&md5=639a9513bfc11d73599a1b5e6d2a8c2f

ภาษา: English-Great Britain (EN-GB)

ดูบนเว็บไซต์ของสำนักพิมพ์

บทคัดย่อ

Fe and Cu powders were mixed at a 50:50 ratio. Then, Fe-Cu alloys were prepared using the ball milling technique with different milling times of 6, 12, 18, 24, 30, 36, and 42 h. The crystalline structure was analyzed using X-ray diffraction (XRD), and it was found that the optimum milling time was 30 h. The homogeneity of the Fe and Cu elements in the Fe–Cu alloys was analyzed using the scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM–EDX) mapping technique. Additionally, the crystal orientation of the Fe–Cu alloys was investigated using transmission electron microscopy (TEM). To fabricate the cathode for nitrate removal via electrolysis, an Fe–Cu alloy milled for 30 h was deposited onto a copper substrate using mechanical milling, then annealed at 800 °C. A pulsed DC electrolysis method was developed to test the nitrate removal efficiency of the Fe–Cu-coated cathode. The anode used was an Al sheet. The synthesized wastewater was prepared from KNO3. Nitrate removal experiments from the synthesized wastewater were performed for durations of 0–4 h. The results show that the nitrate removal efficiency at 4 h was 96.90% compared to 74.40% with the Cu cathode. © 2025 Elsevier B.V., All rights reserved.

คำสำคัญ

ไม่พบข้อมูลที่เกี่ยวข้อง