Boosting Photoelectrochemical Catalytic Ability of Bismuth Vanadate toward Water Oxidation via Synergistic Surface Defect Engineering and MXene-Assisted Charge Transport

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งCheng, T.-M.; Wang, Y.-R.; Chiu, Y.-H.; Kongvarhodom, C.; Saukani, M.; Yougbaré, S.; Chen, H.-M.; Lin, L.-Y.

ผู้เผยแพร่American Chemical Society

ปีที่เผยแพร่ (ค.ศ.)2025

Volume number10

Issue number35

หน้าแรก40557

หน้าสุดท้าย40566

จำนวนหน้า10

eISSN2470-1343

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-105016755499&doi=10.1021%2Facsomega.5c06250&partnerID=40&md5=4f1e3a6282ab08f4e7372607be3ec3db

ภาษาEnglish-Great Britain (EN-GB)


ดูบนเว็บไซต์ของสำนักพิมพ์


บทคัดย่อ

Bismuth vanadate (BiVO4) is regarded as a promising photoanode material for solar-driven photoelectrochemical (PEC) water oxidation, due to its visible-light absorption and favorable band edge positions. However, the practical application is hindered by limited charge carrier mobility and significant surface recombination. In this study, a dual-modification strategy is applied by combining alkaline etching and MXene integration to enhance surface reactivity and charge transport properties of BiVO4. Alkaline etching introduces structural defects and active sites on BiVO4surface, which promote hole accumulation and facilitate interfacial redox reactions. Meanwhile, incorporating MXene forms a conductive interface that accelerates hole extraction and suppresses recombination. Although alkaline etching slightly reduces light absorption due to morphological restructuring, the subsequent MXene addition recovers and enhances photon harvesting. In the absence of hole scavengers, the pristine BiVO4electrode achieves a photocurrent density of 4.65 mA/cm2at 1.23 V vs RHE at AM 1.5G, which increases to 5.13 mA/cm2for alkaline-etched BiVO4and further to 6.15 mA/cm2for alkaline-etched BiVO4coupled with MXene (MXene/E-BVO). Moreover, the MXene/E-BVO electrode retains 93.4% of its initial photocurrent after continuous illumination for 10,000 s. These results confirm the effectiveness of combining surface and interfacial engineering to improve PEC water splitting performance of BiVO4. © 2025 The Authors. Published by American Chemical Society


คำสำคัญ

ไม่พบข้อมูลที่เกี่ยวข้อง


อัพเดทล่าสุด 2026-04-02 ถึง 00:00