Monitoring Hydrogen and Methane Gases in Transformer Oil Using Palladium and Polydimethylsiloxane Coated Fiber Bragg Grating Sensors
บทความในวารสาร
ผู้เขียน/บรรณาธิการ
กลุ่มสาขาการวิจัยเชิงกลยุทธ์
รายละเอียดสำหรับงานพิมพ์
รายชื่อผู้แต่ง: Fawad, F.; Chotigo, S.; Bhatranand, A.; Yongprapat, S.; Anantathanasarn, S.; Suksomboon, R.
ผู้เผยแพร่: Institute of Electrical and Electronics Engineers
ปีที่เผยแพร่ (ค.ศ.): 2025
Volume number: 13
หน้าแรก: 182846
หน้าสุดท้าย: 182855
จำนวนหน้า: 10
eISSN: 2169-3536
ภาษา: English-United States (EN-US)
บทคัดย่อ
This study presents Fiber Bragg Grating (FBG) sensors coated with palladium (Pd) and polydimethylsiloxane (PDMS) for detecting dissolved hydrogen (H2) and methane (CH4) in transformer oil, key indicators of incipient transformer faults. Laboratory evaluations covered concentrations of 5–2146 ppm for H2 and 3–1551 ppm for CH4 at 10–90 °C. Gas-induced Bragg wavelength shifts were validated against Dissolved Gas Analysis (DGA) using the Transport X system. The Pd-coated H2 sensors achieved sensitivities of 0.000487 nm/ppm with 97.04% accuracy and 0.000451 nm/ppm with 99.953% accuracy, while PDMS-coated CH4 sensors reached 0.00591 nm/ppm with 95.85% accuracy and 0.00226 nm/ppm with 95.03% accuracy. All sensors exhibited strong linearity (R2 > 0.91) and excellent repeatability (RSD < 1% above 40 °C). Temperature compensation models were developed to ensure accuracy under varying operational conditions. Compared with previously reported optical gas sensors, the proposed Pd- and PDMS-coated FBG sensors demonstrate superior sensitivity, broad detection range, thermal stability, and cost-effectiveness. These features make them highly promising for real-time, in-situ monitoring of dissolved gases, enabling advanced fault diagnosis and condition-based maintenance in power transformers. © 2013 IEEE.
คำสำคัญ
ไม่พบข้อมูลที่เกี่ยวข้อง
ติดต่อสอบถามเพิ่มเติมได้ที่