Effect of reaction between fe and carbide particles on mechanical properties of fe-base composite

Conference proceedings article

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Chakthin S., Poolthong N., Tongsri R.

ผู้เผยแพร่: Trans Tech Publications

ปีที่เผยแพร่ (ค.ศ.): 2008

Volume number: 55-57

หน้าแรก: 357

หน้าสุดท้าย: 360

จำนวนหน้า: 4

ISBN: 9780878493562

นอก: 1022-6680

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-62949195772&partnerID=40&md5=8e42d2ff7788f8756358f91b7d57cdac

ภาษา: English-Great Britain (EN-GB)

บทคัดย่อ

Sintered Fe-5 wt. % carbide (SiC or TiC) composites have been prepared via a powder metallurgy (P/M) route. Two carbide particle sizes, < 20 μm and 20-32 μm, were mixed with Fe powder. The powder mixtures were compacted and sintered at 3 different temperatures, 1100, 1150 and 1200 °C. Microstructures of sintered Fe-5 wt. % SiC composites showed evidence of SiC decomposition. The decomposed Si and C atoms diffused into Fe particles resulting in formation of solid solution of Si and C in Fe during sintering. During cooling, the solid solution of C in Fe decomposed to pearlite structure (ferrite and cementite (Fe3C) lamellar structure). Microstructures of sintered Fe-5 wt. % TiC composites showed no evidence of TiC decomposition at the investigated sintering temperatures. Because of the reaction between SiC and Fe, tensile strength and hardness of the sintered Fe-SiC composites were higher than those of the sintered Fe. Experimental results showed that strength and hardness of the sintered Fe-SiC composites increased with increasing sintering temperature and with decreasing SiC particle size. In contrast, mechanical properties of the sintered Fe-TiC composites were inferior to those of the sintered Fe. The reason of poor mechanical properties may be attributed to poor bonding between Fe and TiC particles. © 2008 Trans Tech Publications, Switzerland.

คำสำคัญ

Carbide particles, Fe-base composite