Characteristics and composition of lignites and boiler ashes and their relation to slagging: The case of Mae Moh PCC boilers

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

บัณฑิต ฟุ้งธรรมสาร

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Pipatmanomai S., Fungtammasan B., Bhattacharya S.

ผู้เผยแพร่: Elsevier

ปีที่เผยแพร่ (ค.ศ.): 2009

วารสาร: Fuel: The Science and Technology of Fuel and Energy (0016-2361)

Volume number: 88

Issue number: 1

หน้าแรก: 116

หน้าสุดท้าย: 123

จำนวนหน้า: 8

นอก: 0016-2361

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-53549131520&doi=10.1016%2fj.fuel.2008.08.007&partnerID=40&md5=d06895738cc989ee757d7cd4ece531c5

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

In order to examine the cause of occasional slagging problems, a dedicated 7-day sampling and data collection were carried out on two 300-MWe units of Mae Moh power plant owned by the Electricity Generating Authority of Thailand. The properties of feed lignite varied from low (∼11% in ash) to medium (∼18% in ash) CaO content during the sampling period. The elemental content was measured for collected fly ashes, bottom ashes and slags, and compared with those of the feed lignite. The analysis and operational data obtained during the 7-day sampling period were compared with those obtained from the additional laboratory-scale investigation of high Ca lignites and those obtained from one of the units during another period when slagging problem was experienced. The study found that, apart from Ca, the concentration of three other elements and their compounds - Fe, Al and Si, plays a very important role in slag formation and its control while these lignites are used in large utility units. The flue exit gas temperatures (FEGT) of the unit experiencing slagging were also found to approach the initial deformation temperatures (IT) of the lignite ash. The solution appears to be the monitoring of the concentration of four elements, i.e. oxides of Ca, Fe, Al and Si in the feed lignite, and in ensuring through proper mining or blending that concentration of CaO, Fe2O3 and Al2O3 is kept <20%, ∼15% and >15%, respectively, at all times. Also, it is important that the FEGT during operation is kept sufficiently below the IT of the ash of feed lignite at all times. © 2008 Elsevier Ltd. All rights reserved.

คำสำคัญ

Slag