Hardness, adhesion index and microstructure of PEEK coating on Al or Fe substrate by LVOF flame spray
บทความในวารสาร
ผู้เขียน/บรรณาธิการ
กลุ่มสาขาการวิจัยเชิงกลยุทธ์
ไม่พบข้อมูลที่เกี่ยวข้อง
รายละเอียดสำหรับงานพิมพ์
รายชื่อผู้แต่ง: Palathai T., Tharajak J., Sombatsompop N.
ผู้เผยแพร่: Elsevier
ปีที่เผยแพร่ (ค.ศ.): 2008
วารสาร: Materials Science and Engineering: A (0921-5093)
Volume number: 485
Issue number: #
หน้าแรก: 66
หน้าสุดท้าย: 73
จำนวนหน้า: 8
นอก: 0921-5093
ภาษา: English-Great Britain (EN-GB)
ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์
บทคัดย่อ
Low velocity oxy-fuel (LVOF) flame spraying technique was employed to deposit poly-ether-ether-ketone (PEEK) powder onto the low carbon steel (Fe) or aluminum (Al) substrate. The adhesion index, micro-hardness and morphological properties were studied. The effects of interfacial roughness, substrate preheating, spray distance and magnetic field on the adhesion, hardness and morphological results were of our main interest. The results indicated that the optimum process conditions (smooth top-surface with high adhesion index and hardness) for thermal spray coating of PEEK on Fe or Al substrate were achieved at the substrate preheating temperature of 200 ฐC and with the spray distance of 100 mm. The adhesion index was increased with the increase in interfacial roughness. The hardness and adhesion index of the PEEK coating on Fe substrate increased with the application of magnetic field due to the increase in the degree of crystallinity of the PEEK under magnetic field. The recommended flux density under the experimental conditions was 17 mT. ฉ 2007 Elsevier B.V. All rights reserved.
คำสำคัญ
Magnetic flux density, Poly-ether-ether-ketone, Scratch test