A fixed rate launching of mixed- model car sequencing in the multiple assembly lines
Conference proceedings article
ผู้เขียน/บรรณาธิการ
กลุ่มสาขาการวิจัยเชิงกลยุทธ์
ไม่พบข้อมูลที่เกี่ยวข้อง
รายละเอียดสำหรับงานพิมพ์
รายชื่อผู้แต่ง: Prombanpong S., Dumkum C., Satranonda E.
ผู้เผยแพร่: Hindawi
ปีที่เผยแพร่ (ค.ศ.): 2010
หน้าแรก: 1266
หน้าสุดท้าย: 1270
จำนวนหน้า: 5
ISBN: 9781424485031
นอก: 0146-9428
eISSN: 1745-4557
ภาษา: English-Great Britain (EN-GB)
บทคัดย่อ
This paper aims to sequence mixed-models of assembly cars launching into the final inspection lines using a fixed rate launching interval algorithm. There are four different car models which are simultaneously assembled in the assembly lines. Finally, they are queued up for inspection at the workstations which are designed in 3 parallel lines. Due to the fact that each model has different required production demands; therefore, the exact sequencing pattern in order to meet required production rate is inevitable. Thus, the algorithm in mixed- model assembly line (MMAL) namely fixed rate launching interval is applied. However, the production requirement can't be equally divided among the mentioned 3 parallel lines. Therefore, the fixed rate launching algorithm will be applied to each line. As a result the launching interval of each line is determined at 3.390, 3.630, and 3.630 minutes respectively. It is found that the exact sequencing pattern can be obtained and the required production rate can be achieved. The idle and/or congestion times are kept at minimum; consequently, the remaining time at the end of an hour is considerable increasing from 3.495 to 9.150 minutes in line 1 and slightly increasing from 7.262 to 9.80 minute in line 2 and 3. ฉ2010 IEEE.
คำสำคัญ
Fixed rate launching interval, MMAL problem
ติดต่อสอบถามเพิ่มเติมได้ที่