Influence of continuous and discontinuous depositions on properties of ITO films prepard by DC magnetron sputtering

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Aiempanakit K., Rakkwamsuk P., Dumrongrattana S.

ผู้เผยแพร่: World Scientific Publishing

ปีที่เผยแพร่ (ค.ศ.): 2009

วารสาร: Modern Physics Letters B (0217-9849)

Volume number: 23

Issue number: 26

หน้าแรก: 3157

หน้าสุดท้าย: 3170

จำนวนหน้า: 14

นอก: 0217-9849

eISSN: 1793-6640

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-70350314400&doi=10.1142%2fS0217984909021211&partnerID=40&md5=9d73af9649524c28f1e3ea1796b4bacd

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

Indium tin oxide (ITO) films were deposited on glass substrate without external heating by DC magnetron sputtering with continuous deposition of 800 s (S1) and discontinuous depositions of 400 s × 2 times (S2), 200 s × 4 times (S3) and 100 s × 8 times (S4). The structural, surface morphology, optical transmittance and electrical resistivity of ITO films were measured by X-ray diffraction, atomic force microscope, spectrophotometer and four-point probe, respectively. The deposition process of the S1 condition shows the highest target voltage due to more target poisoning occurrence. The substrate temperature of the S1 condition increases with the saturation curve of the RC charging circuit while other conditions increase and decrease due to deposition steps as DC power turns on and off. Target voltage and substrate temperature of ITO films decrease when changing the deposition conditions from S1 to S2, S3 and S4, respectively. The preferential orientation of ITO films were changed from dominate (222) plane to (400) plane with the increasing number of deposition steps. The ITO film for the S4 condition shows the lowest electrical resistivity of 1.44 × 10 -3 Ω·cm with the highest energy gap of 4.09 eV and the highest surface roughness of 3.43 nm. These results were discussed from the point of different oxygen occurring on the surface ITO target between the sputtering processes which affected the properties of ITO films. © 2009 World Scientific Publishing Company.

คำสำคัญ

Continuous deposition, Discontinuous deposition, Target poisoning