Rate-dependent behaviour of clay during cyclic 1D compression

Conference proceedings article


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งKawabe S., Kongkitkul W., Hirakawa D., Tatsuoka F.

ผู้เผยแพร่Hindawi

ปีที่เผยแพร่ (ค.ศ.)2009

Volume number1

หน้าแรก303

หน้าสุดท้าย307

จำนวนหน้า5

ISBN9781607500315

นอก0146-9428

eISSN1745-4557

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84859799314&doi=10.3233%2f978-1-60750-031-5-303&partnerID=40&md5=4f13f35dcff66e375cbf683e84bc5736

ภาษาEnglish-Great Britain (EN-GB)


ดูบนเว็บไซต์ของสำนักพิมพ์


บทคัดย่อ

Drained constant-rate-of-strain one-dimensional compression tests at different strain rates with and without large unload/reload cycles and many sustained loading (SL) stages, as well as standard consolidation tests, were performed on reconstituted and undisturbed soft clays. Significantly rate-dependent stress-strain behaviour of Isotach type, not due to delayed dissipation of excessive pore water pressure but due to the viscous properties of clay, was observed. The creep axial strain rate at SL stages while otherwise the effective axial stress σ′ a was increasing at positive axial strain rates ε̇ a was always positive. The creep axial strain rate at SL stages while otherwise σ′ a was decreasing was basically negative, whereas it was positive immediately after load reversal from primary loading. Irrespective of the signs of current σ̇′ a and ε̇ a, primary loading and reloading are defined by ε̇ a ir > 0, while unloading by ε̇ a ir < 0. These trends of behaviour are simulated by the non-linear three-component elasto-viscoplastic model. © 2009 IOS Press.


คำสำคัญ

Loading/unloading/reloadingOne-dimensional compressionViscous property


อัพเดทล่าสุด 2023-18-10 ถึง 07:40