Use of Expanded-EPDM as protecting layer for moderation of photo-degradation in Wood/NR composite for roofing applications

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งYamsaengsung W., Sombatsompop N.

ผู้เผยแพร่Wiley

ปีที่เผยแพร่ (ค.ศ.)2010

วารสารJournal of Applied Polymer Science (0021-8995)

Volume number117

Issue number1

หน้าแรก335

หน้าสุดท้าย342

จำนวนหน้า8

นอก0021-8995

eISSN1097-4628

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-77950952816&doi=10.1002%2fapp.31256&partnerID=40&md5=ac2aa8d7e1984c9b6417a7a218210826

ภาษาEnglish-Great Britain (EN-GB)


ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์


บทคัดย่อ

Changes in tensile properties, sample size, interfacial strength, and thermal conductivity of melt-laminating layers of wood/ebonite natural rubber (NR) and expanded ethyelene-propylene diene rubber (EPDM) for polymeric roofing applications were monitored under a period of UV aging times for 60 days, the results being compared with single rubber layers of wood/NR and expanded-EPDM. The experimental results suggested that the tensile modulus of the wood/NR-EPDM melt-laminating layer increased with increasing aging time. The tensile strength of the wood/NR layer decreased after prolonged UV aging, and positioned between that of the wood/NR and expanded-EPDM layers. The sample size reduction of wood/NR layer with expanded-EPDM top coating layer was lower than that for wood/NR single layer. The peel strength of the wood/NR-EPDM melt-laminating layer was found to decrease with increasing UV aging time as a result of delamination of the rubber layers. The thermal conductivity of the wood/NR-EPDM melt-laminating layer decreased from 0.085 to 0.070 W/m K with increasing aging times upto 40 days, but tended to increase to 0.080 W/m K at the aging time of 60 days. The experimental results in this work clearly suggested that expanded-EPDM could be used as protecting layer, not only for moderation of photooxidative degradations of wood/NR layer for roofing application, but also for minimization of dimension changes of the wood/NR-EPDM melt-laminating layer. ฉ 2010 Wiley Periodicals, Inc.


คำสำคัญ

coatingRubberVulcanization


อัพเดทล่าสุด 2023-23-09 ถึง 07:35