Filler effect of fine particle sand on the compressive strength of mortar

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งJaturapitakkul C., Tangpagasit J., Songmue S., Kiattikomol K.

ผู้เผยแพร่Springer

ปีที่เผยแพร่ (ค.ศ.)2011

วารสารInternational Journal of Minerals, Metallurgy and Materials (1674-4799)

Volume number18

Issue number2

หน้าแรก240

หน้าสุดท้าย246

จำนวนหน้า7

นอก1674-4799

eISSN1869-103X

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-80052606212&doi=10.1007%2fs12613-011-0429-6&partnerID=40&md5=b92bf7c61f94149f1492b5c92e33f3a3

ภาษาEnglish-Great Britain (EN-GB)


ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์


บทคัดย่อ

The river sand, which is a non-pozzolanic material, was ground into 3 different particle sizes. Portland cement type I was replaced by the ground river sands at 10wt%-40wt% of binder to cast mortar. Compressive strengths of mortar were investigated and the filler effect of different fine particles of sand on the compressive strength of mortar was evaluated. The results show that the compressive strength of mortar contributed from the filler effect of smaller particles is higher than that of the coarser ones. The difference in compressive strength of mortar tends to be greater as the difference in ground river sand fineness increases. The results also suggest that ASTM C618 specification is not practically suitable for specifying pozzolan in concrete since the str ngth activity index of mortar containing ground river sand (high crystalline phase) with 33.8wt% of particles retained on a 45-์m sieve can pass the strength requirement. ฉ University of Science and Technology Beijing and Springer-Verlag Berlin Heidelberg 2011.


คำสำคัญ

Hydration


อัพเดทล่าสุด 2023-25-09 ถึง 07:35