Compressive strength and degree of reaction of biomass- and fly ash-based geopolymer

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งSongpiriyakij S., Kubprasit T., Jaturapitakkul C., Chindaprasirt P.

ผู้เผยแพร่Elsevier

ปีที่เผยแพร่ (ค.ศ.)2010

วารสารConstruction and Building Materials (0950-0618)

Volume number24

Issue number3

หน้าแรก236

หน้าสุดท้าย240

จำนวนหน้า5

นอก0950-0618

eISSN1879-0526

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-73749083540&doi=10.1016%2fj.conbuildmat.2009.09.002&partnerID=40&md5=bd59870b4992bf157d209a5963cb7c56

ภาษาEnglish-Great Britain (EN-GB)


ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์


บทคัดย่อ

Rice husk and bark ash (RHBA) was used as a rich SiO2 source to partially replace fly ash in making geopolymer. Consequently, the SiO2/Al2O3 ratio was extended to the wide range of 4.03-1035. Compressive strength, degree of reaction, and microstructure of the geopolymers were investigated to observe the effect of SiO2/Al2O3 ratio. Results revealed that the optimum SiO2/Al2O3 ratio to obtain the highest compressive strength was 15.9. Fly ash was more reactive than RHBA. It was also shown that not only the reactivity of the source materials but also the quality of the matrix contributed to the enhancement of compressive strength of the geopolymer paste. ฉ 2009 Elsevier Ltd. All rights reserved.


คำสำคัญ

Degree of reactionRice husk and bark ash


อัพเดทล่าสุด 2023-23-09 ถึง 07:35