The effects of channel diameter on flow pattern, void fraction and pressure drop of two-phase air-water flow in circular micro-channels

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งSaisorn S., Wongwises S.

ผู้เผยแพร่Elsevier

ปีที่เผยแพร่ (ค.ศ.)2010

วารสารExperimental Thermal and Fluid Science (0894-1777)

Volume number34

Issue number4

หน้าแรก454

หน้าสุดท้าย462

จำนวนหน้า9

นอก0894-1777

eISSN1879-2286

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-77549086182&doi=10.1016%2fj.expthermflusci.2009.02.006&partnerID=40&md5=0c55a843df746f059b5db4c68cb4f124

ภาษาEnglish-Great Britain (EN-GB)


ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์


บทคัดย่อ

Two-phase air-water flow characteristics are experimentally investigated in horizontal circular micro-channels. Test sections are made of fused silica. The experiments are conducted based on three different inner diameters of 0.53, 0.22 and 0.15 mm with the corresponding lengths of 320, 120 and 104 mm, respectively. The test runs are done at superficial velocities of gas and liquid ranging between 0.37-42.36 and 0.005-3.04 m/s, respectively. The flow visualisation is facilitated by systems mainly including stereozoom microscope and high-speed camera. The flow regime maps developed from the observed flow patterns are presented. The void fractions are determined based on image analysis. New correlation for two-phase frictional multiplier is also proposed for practical applications. ฉ 2009.


คำสำคัญ

ไม่พบข้อมูลที่เกี่ยวข้อง


อัพเดทล่าสุด 2023-01-10 ถึง 07:35