Effect of draw bead height on wall features in rectangular deepdrawing process using finite element method
Conference proceedings article
ผู้เขียน/บรรณาธิการ
กลุ่มสาขาการวิจัยเชิงกลยุทธ์
ไม่พบข้อมูลที่เกี่ยวข้อง
รายละเอียดสำหรับงานพิมพ์
รายชื่อผู้แต่ง: Thipprakmas S.
ผู้เผยแพร่: Trans Tech Publications
ปีที่เผยแพร่ (ค.ศ.): 2011
Volume number: 264-265
หน้าแรก: 1580
หน้าสุดท้าย: 1585
จำนวนหน้า: 6
ISBN: 9783037850534
นอก: 1022-6680
eISSN: 1662-8985
ภาษา: English-Great Britain (EN-GB)
ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์
บทคัดย่อ
Concave/convex wall features are usually generated in the deep-drawn parts with complicated geometry, especially the difficult-to-deep draw materials. The application of the draw bead could reduce the concave/convex wall features. However, it is difficult to determine the suitable draw bead geometry and its position to obtain a straight wall. In this study, the effects of draw bead height were investigated using the finite element method (FEM) and experiments. The application of the draw bead and the effects of its height on the concave/convex wall features could be theoretically clarified on the basis of principal stress distribution. The application of draw bead led to the decrease in tensile stress in the direction of punch movement and also increased in the tensile stress distributed to the corner zone; therefore, the concave wall feature decreased. In addition, this feature decreased as the draw bead height increased. However, the application of a very large draw bead height resulted in a convex feature. The FEM simulation results were validated by experiments in the following two cases, i.e., without and with draw bead formations. With reference to the material thickness distribution, the FEM simulation results showed a good agreement with experimental results. ฉ (2011) Trans Tech Publications, Switzerland.
คำสำคัญ
Concave, Convex, Deep drawing, Draw bead, Rectangular
ติดต่อสอบถามเพิ่มเติมได้ที่