Cure characteristic and mechanical properties of epoxidized natural rubber/chloroprene (ENR/CR) blends
Conference proceedings article
Authors/Editors
Strategic Research Themes
No matching items found.
Publication Details
Author list: Thongpin C., Niltui P., Sornwaneenawakhun P., Maneeprom T., Malithong S., Wimolmala E.
Publisher: Trans Tech Publications
Publication year: 2010
Volume number: 93-94
Start page: 631
End page: 634
Number of pages: 4
ISBN: 0878492852; 9780878492855
ISSN: 1022-6680
eISSN: 1662-8985
Languages: English-Great Britain (EN-GB)
View in Web of Science | View on publisher site | View citing articles in Web of Science
Abstract
Epoxidized Natural rubber (ENR) with the epoxide content of 40 % was prepared and blended with various contents of chloroprene rubber (CR) and 50 phr of carbon black. The cure characteristic, mechanical properties and the effect of gasohol E-85 on the mechanical properties of the rubber vulcanizate were studied. It was revealed from cure characteristic results, tested by Moving Die Rheometer (MDR), that minimum torque of the rubber compounds increased with the content of CR whereas maximum torque tended to increase at the content of 10 phr and decrease after this content, of which the values agreed well with the modulus at 100% elongation in rubber vulcanizates. Considering characteristic scorch and cure time, the values increased with the CR contents. It was clear from the result that at the ENR:CR ratio of 90:10, modulus of 100% elongation and tear strength exhibited the highest values. It was also found that the mechanical properties of the blend vulcanizates were slightly suffered by gasohol E85 except for tear strength. It was understood that this must be because of the effect of the phase continuity and crosslinking that occurred differently in two phases. The phase morphology of the blends were also investigated and reported in the research. ฉ (2010) Trans Tech Publications.
Keywords
Cure characteristic properties, ENR/CR, Epoxidized natural rubber blend