Finite element analysis of bending mechanism and spring-back/spring-go feature in various U-bending processes
Conference proceedings article
ผู้เขียน/บรรณาธิการ
กลุ่มสาขาการวิจัยเชิงกลยุทธ์
ไม่พบข้อมูลที่เกี่ยวข้อง
รายละเอียดสำหรับงานพิมพ์
รายชื่อผู้แต่ง: Thipprakmas S., Phanitwong W.
ผู้เผยแพร่: Wiley-VCH Verlag
ปีที่เผยแพร่ (ค.ศ.): 2012
Volume number: SPL. ISSUE
หน้าแรก: 351
หน้าสุดท้าย: 354
จำนวนหน้า: 4
ISBN: 9783514007970
นอก: 1611-3683
ภาษา: English-Great Britain (EN-GB)
บทคัดย่อ
The U-bending process has long been employed to fabricate sheet parts like channels, beams, and frames; the major problem encountered is the spring-back/spring-go feature. However, the bending mechanism and spring-back/spring-go feature in various Ubending processes of no pad, a pad, and a pad and blankholder have not been clearly identified. Therefore, it is sometimes difficult to improve and control the product quality due to the difficulty in selecting suitable process parameters related to the material property and its thickness. In the present study, the finite element method (FEM) was used and laboratory experiments were performed to clarify the bending mechanism and spring-back/spring-go feature. The effect of punch radius was also investigated. On the basis of stress distribution and material flow analyses, the reversed bending characteristic generated in the case of no pad resulting in the increase of spring-go feature. In the case of a pad and blankholder, the work piece was stretched resulting in the wall thinning and poor geometry. In the case of a pad, the results showed that the use of pad could prevent the reversed bending characteristic; however the suitable pressure pad was strongly considered. The FEM simulation results were validated by the laboratory experiments. The FEM simulation bending force and bending angle results were agreed with those from the experimental results. ฉ 2012 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
คำสำคัญ
Bending, Spring-back, Spring-go
ติดต่อสอบถามเพิ่มเติมได้ที่