Finite element analysis of flange-forming direction in the hole flanging process

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Thipprakmas S., Phanitwong W.

ผู้เผยแพร่: Springer

ปีที่เผยแพร่ (ค.ศ.): 2012

วารสาร: International Journal of Advanced Manufacturing Technology (0268-3768)

Volume number: 61

Issue number: #

หน้าแรก: 609

หน้าสุดท้าย: 620

จำนวนหน้า: 12

นอก: 0268-3768

eISSN: 1433-3015

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84864532559&doi=10.1007%2fs00170-011-3721-8&partnerID=40&md5=535a0760858605fe96bd63970cb182bb

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

The hole flanging process, in which a pre-holed workpiece is expanded by a larger punch, is frequently used in many industries. However, due to the large number of process parameters and their complicated relationships, poor flange edge squareness is commonly generated and results in an increase of secondary operation. In this study, to improve the quality of flange parts, finite element method (FEM) was used to investigate the flange-forming mechanism and effects of upward and downward burr orientation flange-forming directions. Laboratory experiments were performed to validate the accuracy of the FEM simulation results. The FEM simulation results clearly explained the flange-forming mechanism, as well as the effects of flange-forming direction, based on stress distribution analysis. Upward and downward burr orientation flange-forming directions were suitably applied for large and small hole expansion ratios, respectively. In addition, the effects of other process parameters related to the flangeforming direction, including punching clearance, flange thickness, and hole expansion ratios, were also investigated. The FEM simulation results showed good agreement with the laboratory experiments. These results showed that to achieve good squareness at the flange edge, the use of upward and downward burr orientation flange-forming direction and its relation to the other process parameters need to be considered. ฉ Springer-Verlag London Limited 2011.

คำสำคัญ

Burr orientation, Flange-forming direction, Hole expansion, Hole flanging, Punching