Effect of heat treatment on electrical properties of fluorine doped tin dioxide films prepared by ultrasonic spray pyrolysis technique

Conference proceedings article

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Luangchaisri C., Dumrongrattana S., Rakkwamsuk P.

ผู้เผยแพร่: Elsevier

ปีที่เผยแพร่ (ค.ศ.): 2012

Volume number: 32

หน้าแรก: 663

หน้าสุดท้าย: 669

จำนวนหน้า: 7

นอก: 1877-7058

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84871934345&doi=10.1016%2fj.proeng.2012.01.1324&partnerID=40&md5=dec956de0f1f2c4bfcf4254ece0443b5

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

Fluorine doped tin dioxide (FTO) films were prepared on glass substrates by a homemade ultrasonic spray pyrolysis system and the electrical properties were improved by annealing in air. The as-deposited film was prepared from SnCl 4 solution. This spray solution prepared from tin tetrachloride pentahydrate (SnCl4·5H2O) dissolved in deionized water at 0.3M concentration and NH4F was added into the solution for fluorine doping. The NH4F/SnCl4 ratio was varied as 0, 5, 10, 20 and 40 %mol, respectively. All of films were prepared at the same period of time, 15 minutes, and substrate temperatures of 300°C. The lowest resistivity of prepared films was found about 8.40×10-1 Ω·cm at the optimum NH4F/SnCl4 ratio of 10 %mol. The heat treatment parameters were annealed temperature and time. The annealed temperature was varying as 200, 250, 300 and 350 °C and annealed times were set at three different values as 15, 30 and 45 min. for each annealed temperature. After heat treatment process, the transmittance in the near infrared range was decreased due to the decreasing of resistivity. © 2010 Published by Elsevier Ltd.

คำสำคัญ

Fluorine doping, Heat treatment, Spray pyrolysis, Tin dioxide