Utilization of Fly Ash, Rice Husk Ash, and Palm Oil Fuel Ash in Glass Fiber-Reinforced Concrete

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Sujivorakul C., Jaturapitakkul C., Taotip A.

ผู้เผยแพร่: American Society of Civil Engineers

ปีที่เผยแพร่ (ค.ศ.): 2011

วารสาร: Journal of Materials in Civil Engineering (0899-1561)

Volume number: 23

Issue number: 9

หน้าแรก: 1281

หน้าสุดท้าย: 1288

จำนวนหน้า: 8

นอก: 0899-1561

eISSN: 1943-5533

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-80052695842&doi=10.1061%2f%28ASCE%29MT.1943-5533.0000299&partnerID=40&md5=a7c843c1296dbcd9b7b26154aa7f7228

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

This paper presents the use of widely available fly ash (FA), rice husk ash (RHA), and palm oil fuel ash (POFA) in Thailand to make glass fiber-reinforced concrete (GFRC). These substitutes were used to replace ASTM Type I portland cement by 0 (control), 10, 20, 30, and 40%. The particle sizes of FA, RHA, and POFA were improved by grinding in a ball mill until 95% of the particles could pass through standard sieve size no. 325. An external-spray-mix machine was employed to produce all specimens with 5% by weight of alkaline-resistant (AR) glass fibers. The GFRC specimens were investigated for water absorption, bending strength, bending strain, and toughness at 7, 28, 56, and 180 days. Throughout this period the specimens were submersed in water at room temperature (25ฐC). All specimens were prepared and tested according to the BS-EN 1170-5 standard. Test results showed that, for both GFRC panels with and without cement replacement by FA, RHA, and POFA, the limit of proportionality (LOP) increased with an increase in the age of curing, whereas the modulus of rupture (MOR) increased initially and then started to drop gradually. Scanning electron microscopy showed that calcium hydroxide deposition within the filaments of glass fiber made it more brittle. This might be the cause of the reduction of MOR. It is recommended that up to 20% of FA, RHA, or POFA be used to replace portland cement without affecting the physical properties of GFRC, which includes the benefits of lowering cost and helping to reduce CO2 emission. ฉ 2011 American Society of Civil Engineers.

คำสำคัญ

Bending, Glass fiber-reinforced concrete, pozzolan