A novel single phase AC-AC converter with power factor control

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Kitcharoenwat S., Konghirun M., Sangswang A.

ปีที่เผยแพร่ (ค.ศ.): 2013

วารสาร: Transactions on Electrical Engineering, Electronics, and Communications (1685-9545)

Volume number: 11

Issue number: 1

หน้าแรก: 17

หน้าสุดท้าย: 23

จำนวนหน้า: 7

นอก: 1685-9545

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84873182666&partnerID=40&md5=4f039a753ab24b652bce3738cf60a40e

ภาษา: English-Great Britain (EN-GB)

บทคัดย่อ

This paper presents a novel single-phase ac-ac converter topology that is capable of creating voltage output to buck or boost mode. The structure of topology uses minimal switches controlled with the two-section overlap in each cycle of the ac input. The proposed topology is simple, low-cost, and contains minimum number of device. The control strategy can regulate a wide output voltage range with low harmonic distortion and improve the power factor. The closed-loop control is divided into two parts. The first part is the voltage control of dual dc-link capacitors, and the second part controls the ac output voltage. In the part of voltage control at the dc-link capacitors, the switches operate in the boost mode. The ac input current is controlled by PID control with the aim for power factor correction. The output voltage is regulated by the PID control where the sinusoidal pulse-width modulation (sPWM) technique is chosen. Simulation and experimental results confirmed the output voltage regulation, the control of the charging dual dc-link voltage capacitors, the responses to the input voltage and load changes.

คำสำคัญ

AC-AC converter, buck-boost capability, Continuous current mode (CCM), Power factor, single-phase ac-ac converter