Solar reflectance, surface adhesion, and thermal conductivity of wood/natural rubber composite sheet with Tio 2/polyurethane topcoat for roofing applications

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งHamaviriyapornwattana N., Sombatsompop N., Markpin T., Kositchaiyong A., Wimolmala E.

ผู้เผยแพร่Wiley

ปีที่เผยแพร่ (ค.ศ.)2012

วารสารJournal of Vinyl and Additive Technology (1083-5601)

Volume number18

Issue number3

หน้าแรก184

หน้าสุดท้าย191

จำนวนหน้า8

นอก1083-5601

eISSN1548-0585

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84864711660&doi=10.1002%2fvnl.20302&partnerID=40&md5=0a30f215d9ac54f5e64e3bec2638ef5a

ภาษาEnglish-Great Britain (EN-GB)


ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์


บทคัดย่อ

Effects of titanium dioxide (TiO 2) dosage in polyurethane (PU) coating and PU coating thickness on solar reflectance, surface adhesion, crack resistance to bending, and thermal conductivity of wood/(natural rubber) (WNR) composite sheet were studied before and after prolonged UV aging. The TiO 2 powder content added to the PU coating was varied from 0 to 15 parts per hundred parts of PU. The average PU coating thickness on the WNR composite sheet was altered from 127 ± 10 to 315 ± 10 μm. The experimental results suggested that the solar reflectance slightly increased with increasing TiO 2 powder but did not change upon varying the PU coating thicknesses. The presence of TiO 2 in the PU coating caused a slight decrease in thermal conductivity because of porosities occurring due to the presence of voids, but increasing the TiO 2 powder content in the coating resulted in a progressive increase in thermal conductivity of the composite sheet. In a UV-accelerated weathering tester (UVB 313 nm), the lightness of the PU coating slightly increased owing to PU discoloration, whereas the solar reflectance, PU/WNR layer adhesion, and crack resistance to bending remained unaffected with increasing UV aging time. J. VINYL ADDIT. TECHNOL., 18:184-191, 2012. © 2012 Society of Plastics Engineers Copyright © 2012 Society of Plastics Engineers.


คำสำคัญ

ไม่พบข้อมูลที่เกี่ยวข้อง


อัพเดทล่าสุด 2023-26-09 ถึง 07:36