Robust digital control of a DC–DC buck converter with low frequency samplings

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งFukaishi Y., Ohta Y., Higuchi K., Takegami E., Tomioka S., Chamnongthai K.

ผู้เผยแพร่Springer

ปีที่เผยแพร่ (ค.ศ.)2012

วารสารArtificial Life and Robotics (1433-5298)

Volume number17

Issue number1

หน้าแรก1

หน้าสุดท้าย6

จำนวนหน้า6

นอก1433-5298

eISSN1614-7456

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84863325609&doi=10.1007%2fs10015-012-0008-6&partnerID=40&md5=4f107e93757069ada9e789ff77f83774

ภาษาEnglish-Great Britain (EN-GB)


ดูบนเว็บไซต์ของสำนักพิมพ์


บทคัดย่อ

A robust DC–DC converter which can covers extensive load change and also input voltage changes with one controller is needed. Then the demand to suppress output voltage change becomes still severer. We propose an approximate 2-degree-of-freedom (2DOF) digital controller which realized start-up response and dynamic load response independently. The controller makes a control bandwidth wider, and at the same time makes variations of the output voltage small at sudden changes of a load and an input voltage. In this paper, a new approximate 2DOF digital control system with additional zeros is proposed. Using the additional zeros, the second-order differential transfer characteristics between equivalent disturbances and a output voltage are realized. Therefore, the new controller makes variations of the output voltage smaller and the sudden changes of the load and the input voltage. This controller is actually implement on a DSP and is connected to the DC–DC converter. Experimental results demonstrate that this type of digital controller can satisfy given severe specifications with low frequency sampling. © ISAROB 2012.


คำสำคัญ

DCDC converterDigital robust controlSecond-order differential


อัพเดทล่าสุด 2023-28-09 ถึง 07:35