Heat transfer performance of screen mesh wick heat pipes using silver-water nanofluid
Journal article
Authors/Editors
Strategic Research Themes
No matching items found.
Publication Details
Author list: Asirvatham L.G., Nimmagadda R., Wongwises S.
Publisher: Elsevier
Publication year: 2013
Journal: International Journal of Heat and Mass Transfer (0017-9310)
Volume number: 60
Issue number: 1
Start page: 201
End page: 209
Number of pages: 9
ISSN: 0017-9310
eISSN: 1879-2189
Languages: English-Great Britain (EN-GB)
View in Web of Science | View on publisher site | View citing articles in Web of Science
Abstract
This study presents the improvement in heat transfer performance of a heat pipe using silver nanoparticles dispersed in DI (De-Ionized) water. The nanoparticles suspended in conventional fluids have superior heat transfer capability due to improved thermal conductivity. The heat pipes are tested for heat inputs ranging from 20 W to 100 W in five steps, which is suitable for removing heat from power transistors in electronics and processors in computers. The effect of various operational limits and test parameters such as heat inputs, volume fraction, vapour temperature on the thermal resistance, evaporation and condensation heat transfer coefficients, are experimentally investigated. The tested silver nanoparticles volume concentration ranged from 0.003% to 0.009% with average nanoparticle diameter of 58.35 nm. The experimental results are evaluated in terms of performance metrics by direct measurement of vapour temperatures in the centre core of heat pipe. A substantial reduction in thermal resistance of 76.2% is observed for 0.009 vol.% concentration of silver nanoparticles. Further an enhancement in the evaporation heat transfer coefficient of 52.7% is observed for the same concentration. The use of nanoparticles enhances the operating range of heat pipe by 21% compared with that of DI water. ฉ 2013 Elsevier B.V. All rights reserved.
Keywords
De-ionized water, Dry-out condition, Evaporation and condensation heat transfer coefficients, thermal resistance