Elastica of a variable-arc-length circular curved beam subjected to an end follower force

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Pulngern T., Sudsanguan T., Athisakul C., Chucheepsakul S.

ผู้เผยแพร่: Elsevier

ปีที่เผยแพร่ (ค.ศ.): 2013

วารสาร: International Journal of Non-Linear Mechanics (0020-7462)

Volume number: 49

หน้าแรก: 129

หน้าสุดท้าย: 136

จำนวนหน้า: 8

นอก: 0020-7462

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84869863429&doi=10.1016%2fj.ijnonlinmec.2012.10.002&partnerID=40&md5=ad56d9c94a4450cf6f3401c11c60cb1c

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

This paper presents postbuckling behaviors of a variable-arc-length (VAL) circular curved beam subjected to an end follower force. One end of the VAL circular curved beam is hinged while the other end is supported by a frictionless slot, which is fixed horizontally and vertically but is allowed to rotate corresponding to loading direction. When the VAL circular curved beam is deformed, the total arc-length of the circular curved beam varies. Two approaches have been applied for the solution of this problem. The first approach is an elliptic integrals method based on elastica theory, which yields the exact closed-form solution in terms of the first and second kinds of elliptic integrals. For validation of the results, the shooting method is employed for a numerical solution by developing the set of nonlinear governing differential equations together with boundary conditions, and then integrating them by using the fourth-order Runge-Kutta algorithm. The results from both approaches are in very good agreement. From the results, it is found that the VAL circular curved beam subjected to an end follower force can be deformed in many mode shapes. For the first and third modes, the beam exhibits both stable and unstable configurations, whereas for the second mode only an unstable configuration exists. The influences of initial curvature on the critical load and the deformed configurations are highlighted. ฉ 2012 Elsevier Ltd.

คำสำคัญ

Circular curved beam, Elastica, Elliptic integral, Follower force, Postbuckling, Variable-arc-length