The characterization of stainless steel particles under the sliding motion

Conference proceedings article

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Bootchai P., Tuchinda K., Jornsanoh P.

ผู้เผยแพร่: Trans Tech Publications

ปีที่เผยแพร่ (ค.ศ.): 2013

Volume number: 811

หน้าแรก: 140

หน้าสุดท้าย: 145

จำนวนหน้า: 6

ISBN: 9783037858608

นอก: 1022-6680

eISSN: 1662-8985

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84886651939&doi=10.4028%2fwww.scientific.net%2fAMR.811.140&partnerID=40&md5=0ce80295e96845216283bca9cb8c6af9

ภาษา: English-Great Britain (EN-GB)

ดูบนเว็บไซต์ของสำนักพิมพ์

บทคัดย่อ

The purpose of this research is to study the characteristic of stainless steel particles under the sliding motion. The effects of effective stress and relative velocity on the characteristic of stainless steel wear particles were studied. The is aiming to monitor possible failure mode in various machine elements, especially in the case of a closed system or contamination sensitive processes such as the hard disk drive manufacturing process, etc. The research results showed that the particles smaller than 1 micron generated from material surface asperities. Moreover, the stress magnitude and velocity have the influence on the size and shape of the stainless steel particles, respectively. The increase in stress and speed will result in a larger particle size and more slender shape, respectively. It can be seen that the size and the shape of wear particles vary according to the sliding conditions. Therefore, the results could be used to identify the process in which the contaminated particles were generated for sliding motion. ฉ (2013) Trans Tech Publications, Switzerland.

คำสำคัญ

contamination, Particles analysis, Sliding motion, Stainless steel particles