Feasibility study of acoustic emission monitoring of hot cracking in GTAW weld

Conference proceedings article

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Charunetratsamee S., Poopat B., Jirarungsatean C.

ผู้เผยแพร่: Trans Tech Publications

ปีที่เผยแพร่ (ค.ศ.): 2013

Volume number: 545

หน้าแรก: 236

หน้าสุดท้าย: 240

จำนวนหน้า: 5

ISBN: 9783037856321

นอก: 1013-9826

eISSN: 1662-9795

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84876210324&doi=10.4028%2fwww.scientific.net%2fKEM.545.236&partnerID=40&md5=8aea43582a7a719c960df0fee4edd89f

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

Acoustic emission testing can be used to detect the energy emitted from material fracture and the advantage of this method is the real time monitoring, however the weld metal discontinuities are normally inspected by using conventional NDT methods such as Penetrant Testing (PT), Magnetic particle Testing (MT), Ultrasonic Testing (UT) and Radiographic Testing (RT) after the completion of welding. The weld defect must be repaired, which involves the cost and consumes a lot of time as well as reduce the reliability of manufactures. This paper presents the application of acoustic emission (AE) technique for monitoring and detecting the discontinuities during welding. In this study, gas tungsten arc welding (GTAW) was selected as test process. Carbon steel plate and autogenous welding technique were used to simulate the hot crack. The data acquisition (DAQ) and AE sensor were used to capture the acoustic signal generated during welding. The AE signals were amplified and filtered by using a preamplifier. Then, signals were modified by wavelet transforms (WT) technique and classified by Fast Fourier Transform (FFT) technique. The results showed the possibility to use AE technique for monitoring and detecting the low signal amplitude generated from crack by using frequency domain. The advantage of this research is to propose the technique for monitoring the weld metal discontinuities during welding. ฉ (2013) Trans Tech Publications.

คำสำคัญ

Discontinuities, Welding