Etching and Technical Parameter of Polymer Film for Manufacture of Nuclear Track Membrane

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Naemchanthara, K.;Ratanatongchai, W.;Kaewwiset, W.;Hoonnivathana, E.;Limsuwan, P.

ปีที่เผยแพร่ (ค.ศ.): 2015

วารสาร: RMUTSB ACADEMIC JOURNAL (2286-9638)

Volume number: 3

Issue number: 1

หน้าแรก: 87

หน้าสุดท้าย: 96

นอก: 2286-9638

URL: http://www.journal.rmutsb.ac.th/2/page_journal.php

บทคัดย่อ

The purpose of the research was to investigate the etching and the technical parameter of polymer films for the manufacture of nuclear track membrane. The polycarbonate film was stored in the thermal column tube and the irradiated neutron at different time. The result shown the optimized time to irradiate neutron of polycarbonate was 20 seconds. Two types of polymer (polycarbonate and polyethylene terephthalate) were the irradiated neutron and the irradiated film which were etched in the chemical etchant by the sodium hydroxide (NaOH) and the potassium hydroxide (KOH) respectively. The technical parameters etched track all polymer films which were investigated by the optical microscopy. Besides that, it was found that the optimized time, the temperature of chemical and the concentration of chemical etched track on two types of polymer film that were 60 and 60 minutes, 60 and 60 ฐC and 6 and 4 mol

คำสำคัญ

etching track, nuclear fission, sodium hydroxide, potassium hydroxide