Influences of Microstructure Characteristics on Forming Limit Behavior of Dual Phase Steels

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Sirinakorn T., Sodjit S., Uthaisangsuk V.

ผู้เผยแพร่: Wiley

ปีที่เผยแพร่ (ค.ศ.): 2015

วารสาร: Steel Research International (1611-3683)

Volume number: 86

Issue number: 12

หน้าแรก: 1594

หน้าสุดท้าย: 1609

จำนวนหน้า: 16

นอก: 1611-3683

eISSN: 1869-344X

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84923480872&doi=10.1002%2fsrin.201400584&partnerID=40&md5=001630f7a677dcd118916a44b3838c86

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

In the automotive sector, dual phase (DP) steel grades have been increasingly used for various car body parts due to their good combination of strength and formability. To control mechanical and fracture characteristics of the DP steels, effects of martensitic phase fraction, morphology, and phase distribution must be understood. In this work, DP steel sheets with different martensitic phase fractions and ferritic grain sizes were produced through the intercritical annealing process. Likewise, FE simulations of 2D representative volume elements (RVEs) based on real micrograph were performed for all generated DP microstructures. Flow behaviors of single individual phases in the DP steels were described by a dislocation theory and local chemical compositions. Calculated stress-strain responses were verified with experimental results from tensile tests. Subsequently, stretch-forming tests under different states of stress using the Nakajima samples were carried out for the examined DP steels. Micromechanics RVE models were then applied to predict failure occurrences in the DP microstructures by considering plastic strain instability. Influences of morphologies and properties of constituent phases on localization due to incompatible deformation between martensite and ferrite were discussed with regard to governing stress states. ฉ 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

คำสำคัญ

plastic strain instability, state of stress