Thermal characteristics and temperature profile changes of structurally different polyethylenes with peroxide modifications

Journal article

Authors/Editors

Strategic Research Themes

No matching items found.

Publication Details

Author list: Likhitlert S., Wongchaleo C., Kositchaiyong A., Wimolmala E., Mitrprasertporn S., Sombatsompop N.

Publisher: Wiley

Publication year: 2014

Journal: Journal of Vinyl and Additive Technology (1083-5601)

Volume number: 20

Issue number: 2

Start page: 80

End page: 90

Number of pages: 11

ISSN: 1083-5601

eISSN: 1548-0585

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84899784347&doi=10.1002%2fvnl.21331&partnerID=40&md5=6ac923e130446a8d59d320e3da4a6ed9

Languages: English-Great Britain (EN-GB)

View in Web of Science | View on publisher site | View citing articles in Web of Science

Abstract

Crosslinking and processing characteristics of polyethylenes (PEs) with different molecular architectures, namely high-density polyethylene (HDPE), linear low-density polyethylene (LLDPE), and low-density polyethylene (LDPE), were studied with regard to the effects of peroxide modifications and coolant flow rates. Dicumyl peroxide (DCP) and di-tert-butyl peroxide (DTBP) were used as free-radical inducers for crosslinking the PEs. The characteristics of interest included normalized gel content, real-time temperature profiles and their cooling rates, exothermic period, crystallinity level, crystallization temperature, and heat distortion temperature. The experiments showed that LDPE exhibited the highest normalized gel content. The real-time cooling rates, taken from the temperature profiles for all PEs before the crystallization region, were greater than those after the crystallization region. The cooling rate of the PEs increased with the presence of DCP, whereas the crystallization temperature of the PEs was lowered. The HDPE appeared to show the longest exothermic period as compared with those of the LLDPE and LDPE. The exothermic period showed an increase with increasing coolant flow rate, but it was decreased by the use of DCP. As for the effect of peroxide type, the gel content and cooling rate of the PE crosslinked by DCP were higher than those for the PE crosslinked by DTBP. The DTBP was the more effective peroxide for introducing crosslinks and simultaneously maintaining the crystallization behavior of the PE. J. VINYL ADDIT. TECHNOL., 20:80-90, 2014. ฉ 2014 Society of Plastics Engineers.

Keywords