Performance characteristics of a downward spray water-jet cooling tower

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งMuangnoi T., Asvapoositkul W., Hungspreugs P.

ผู้เผยแพร่Elsevier

ปีที่เผยแพร่ (ค.ศ.)2014

วารสารApplied Thermal Engineering (1359-4311)

Volume number69

Issue number#

หน้าแรก165

หน้าสุดท้าย176

จำนวนหน้า12

นอก1359-4311

eISSN1873-5606

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84901450927&doi=10.1016%2fj.applthermaleng.2014.04.019&partnerID=40&md5=87c4bc2090180dd505a1f2a5725da4aa

ภาษาEnglish-Great Britain (EN-GB)


ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์


บทคัดย่อ

The performance characteristics of a new type of cooling tower, which is called water-jet cooling tower, are analyzed using experiments and numerical simulations. The water-jet cooling tower would be designed as a modified wet cooling tower, operating without fill and fan. A comparison of the water-jet cooling tower test results with those of the model simulation has demonstrated the validity of that simulation and its use as a design tool. For the preliminary study, we chose tower spray zone height (H), water to air flow rate ratio (L/G), droplet diameter (dd), discharge droplet velocity (vd), and air velocity (va) as the variation parameters. The results indicate that exergy values and 2nd law efficiency are normally sensitive to reasonable variation in dd, L/G and H, but do not respond greatly to reasonable variation in vd, and va. It is also found from the present calculation that the evaporation share of the total energy transfer and that of the total exergy supplied seems to have influence on the tower's performance. ฉ 2014 Elsevier Ltd. All rights reserved.


คำสำคัญ

2nd Law efficiencyWater-jet cooling tower


อัพเดทล่าสุด 2023-06-10 ถึง 07:35