A comparison of the heat transfer performance and pressure drop of nanofluid-cooled heat sinks with different miniature pin fin configurations
Journal article
Authors/Editors
Strategic Research Themes
No matching items found.
Publication Details
Author list: Duangthongsuk W., Wongwises S.
Publisher: Elsevier
Publication year: 2015
Journal: Experimental Thermal and Fluid Science (0894-1777)
Volume number: 69
Start page: 111
End page: 118
Number of pages: 8
ISSN: 0894-1777
eISSN: 1879-2286
Languages: English-Great Britain (EN-GB)
View in Web of Science | View on publisher site | View citing articles in Web of Science
Abstract
The paper reports an experimental investigation into the thermal performance and pressure drop characteristics of nanofluid-cooled heat sinks and then compares the results with the data for water-cooled heat sinks. Heat sinks with miniature circular-fin (MCFHS) and square-fin (MSFHS) structures are used and made from aluminum material with dimensions of 28 ื 33 mm. Similarly, SiO2 nanoparticles dispersed in deionized water with particle concentrations of 0.2%, 0.4%, and 0.6% volume are used as working fluids. The effects of pin fin configuration, particle concentration, and flow rate on the heat transfer performance and flow behaviors are presented. Reynolds numbers based on the hydraulic diameter of each flow channel ranging between 700 and 3700, fluid temperature of 15ฐC, and heat flux ranging from 2 and 5W/cm2 are tested. Hydraulic diameters based on each flow channel are equally designed at 1.2mm for both heat sinks. The experimental results indicate that the heat transfer coefficient increased with increasing Reynolds numbers and particle concentrations. The MCFHS gave greater heat transfer performance than that of the MSFHS by about 6-9%. For pressure drop data, the measured data showed that the pin fin configuration and particle concentration had small effects on the pressure drop and pumping power. ฉ 2015 Elsevier Inc.
Keywords
Pin fin structure
Contact Information