Natural convection of Al2O3/water nanofluid in a square cavity: Effects of heterogeneous heating

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งRashidi I., Mahian O., Lorenzini G., Biserni C., Wongwises S.

ผู้เผยแพร่Elsevier

ปีที่เผยแพร่ (ค.ศ.)2014

วารสารInternational Journal of Heat and Mass Transfer (0017-9310)

Volume number74

หน้าแรก391

หน้าสุดท้าย402

จำนวนหน้า12

นอก0017-9310

eISSN1879-2189

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84898655367&doi=10.1016%2fj.ijheatmasstransfer.2014.03.030&partnerID=40&md5=1ae8b85cf6fce5b881fa0649da62d757

ภาษาEnglish-Great Britain (EN-GB)


ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์


บทคัดย่อ

In this paper, the natural convection in a square cavity filled with Al2O3/water nanofluid has been investigated. The flow and heat transfer characteristics of the nanofluid in the cavity are documented when bottom wall is under heterogeneous heating, the right wall is considered cold while the top and left walls are adiabatic. Nine different cases are considered for the non-uniform heat flux where the total heat flux applied to the cavity is the same for all the cases in magnitude but the profile is different. For different values of Rayleigh numbers (103-106), nanoparticle volume fractions (0-9%), and aspect ratios, the optimal profile of heat flux is determined in which Nusselt number is maximized. It is found that the trend of Nusselt number is different for the nine cases at Ra = 10 3 where the conduction is the dominant phenomenon. The results also reveal that for high values of Rayleigh number, i.e. 106, the Nusselt number is minimized where the heat flux in the vicinity of adiabatic wall is smallest while the heat flux near the cold wall is biggest. ฉ 2014 Elsevier Ltd. All rights reserved.


คำสำคัญ

Heterogeneous heating


อัพเดทล่าสุด 2023-15-10 ถึง 07:36