Effect of solution casting temperature on properties of nafion composite membrane with surface modified mordenite for direct methanol fuel cell

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งPrapainainar P., Theampetch A., Kongkachuichay P., Laosiripojana N., Holmes S.M., Prapainainar C.

ผู้เผยแพร่Elsevier

ปีที่เผยแพร่ (ค.ศ.)2015

วารสารSurface and Coatings Technology (0257-8972)

Volume number271

หน้าแรก63

หน้าสุดท้าย73

จำนวนหน้า11

นอก0257-8972

eISSN1879-3347

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84928584415&doi=10.1016%2fj.surfcoat.2015.01.021&partnerID=40&md5=726fcd3c8379cae16fda284309826c6c

ภาษาEnglish-Great Britain (EN-GB)


ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์


บทคัดย่อ

Incompatibility between organic polymer and inorganic filler has been addressed as critical area of Nafion and mordenite composite membrane fabrication for direct methanol fuel cell (DMFC) application. It possibly brings about void leading to high methanol crossover. Incompatibility at the surface of the filler can be improved by using silane coupling agent. In this study, two coupling agents were used in order to improve interfacial property between filler and polymer matrix, including gamma-glycidoxypropyl trimethoxysilane (GMPTS) and 3-mercaptopropyl triethoxysilane (MPTES). Surfaced modified mordenite was used in Nafion/mordenite composite membranes fabrication by using solution casting method. Properties of composite membranes were investigated, including chemical resistance, water uptake, ion-exchange capacity (IEC), proton conductivity and methanol permeability. It was found that properties of the composite membrane were greatly affected by casting temperature in casting method. In this work, the most suitable solution casting temperature was 100ฐC. The obtained membrane gave 0.59% soluble, 1.38% water uptake and 0.10meqg-1 IEC. With type of silanes, membrane fabricated with MPTES treated mordenite showed better properties than that of GMPTES giving 60% higher proton conductivity and 85% lower methanol permeability at 30ฐC. ฉ 2015 Elsevier B.V.


คำสำคัญ

composite membraneMethanol permeabilityProton conductivitySilane coupling agent


อัพเดทล่าสุด 2023-15-10 ถึง 07:36