Heat transfer performance of Silver/Water nanofluid in a solar flat-plate collector

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งRoy S., Asirvatham L.G., Kunhappan D., Cephas E., Wongwises S.

ผู้เผยแพร่Yildiz Technical University

ปีที่เผยแพร่ (ค.ศ.)2015

Volume number1

Issue number2

หน้าแรก104

หน้าสุดท้าย112

จำนวนหน้า9

นอก2148-7847

eISSN2148-7847

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84950132100&doi=10.18186%2fjte.29475&partnerID=40&md5=6275505186e0cf6f4e5d66506b5ff716

ภาษาEnglish-Great Britain (EN-GB)


ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์


บทคัดย่อ

An experimental study is carried out to investigate the heat transfer characteristics of silver/water nanofluid in a solar flatplate collector. The solar radiation heat flux varies between 800 W/m2and 1000W/m2, and the particle concentration varies between 0.01%, 0.03%, and 0.04%. The fluid Reynolds number varies from 5000 to 25000. The influence of radiation heat flux, mass flow rate of nanofluid, inlet temperature into the solar collector, and volume concentration of the particle on the convective heat transfer coefficient and the collector efficiency are studied. Both parameters increase with increase in the particle volume concentration and flow rate. The maximum percentage increase obtained in the convective heat transfer coefficient is 18.4% for the 0.04% volume concentration at a Reynolds number of 25000. An increase in the performance of nanofluid is also witnessed when compared to the base fluid, which has a strong dependency on volume concentration and mass flow rate.


คำสำคัญ

Solar flat plate collector


อัพเดทล่าสุด 2023-15-10 ถึง 07:36