Determination of stress-strain curve of dual phase steel by nanoindentation technique
บทความในวารสาร
ผู้เขียน/บรรณาธิการ
กลุ่มสาขาการวิจัยเชิงกลยุทธ์
ไม่พบข้อมูลที่เกี่ยวข้อง
รายละเอียดสำหรับงานพิมพ์
รายชื่อผู้แต่ง: Punyamueang S., Uthaisangsuk V.
ผู้เผยแพร่: Trans Tech Publications
ปีที่เผยแพร่ (ค.ศ.): 2015
วารสาร: Key Engineering Materials (1013-9826)
Volume number: 658
หน้าแรก: 195
หน้าสุดท้าย: 201
จำนวนหน้า: 7
นอก: 1013-9826
eISSN: 1662-9795
ภาษา: English-Great Britain (EN-GB)
บทคัดย่อ
The advanced high strength (AHS) steels, for example, dual phase (DP) steels, transformation induced plasticity (TRIP) steels and complex (CP) steels principally exhibit multiphase microstructure features. Thus, mechanical behavior of the constituent phases significantly affects the resulting overall properties of such AHS steels. Novel material characterization techniques on micro- and nano-scale have become greatly more important. In this work, stress-strain response of the DP steel grade 1000 was determined by using the Nanoindentation testing. The DP steel showed the microstructure containing finely distributed martensite islands of about 50% phase fraction in the ferritic matrix. The nano-hardness measurements were firstly performed on each individual phase of the examined steel. In parallel, finite element (FE) simulations of the corresponding nano-indentation tests were carried out. Flow curves of the single ferritic and martensitic phases were defined according to a dislocation based theory. Afterwards, the load and penetration depth curves resulted from the experiments and simulations were compared. By this manner, the proper stress-strain responses of both phases were identified and verified. Finally, the effective stress-strain curve of the investigated DP steel could be determined by using 2D representative volume element (RVE) model. ฉ (2015) Trans Tech Publications, Switzerland.
คำสำคัญ
Nanoindentation test, Stress-strain curve
ติดต่อสอบถามเพิ่มเติมได้ที่