Finite element analysis of asymmetrical leg-length in closed u-bending process
Conference proceedings article
ผู้เขียน/บรรณาธิการ
กลุ่มสาขาการวิจัยเชิงกลยุทธ์
ไม่พบข้อมูลที่เกี่ยวข้อง
รายละเอียดสำหรับงานพิมพ์
รายชื่อผู้แต่ง: Thipprakmas S., Boochakul U., Phanitwong W.
ผู้เผยแพร่: Hindawi
ปีที่เผยแพร่ (ค.ศ.): 2016
หน้าแรก: 211
หน้าสุดท้าย: 216
จำนวนหน้า: 6
ISBN: 9789897581991
eISSN: 1745-4557
ภาษา: English-Great Britain (EN-GB)
บทคัดย่อ
In almost all industrial fields such as automobile and aerospace industries, in recent years, the precisely complicated shapes of channel and frame parts are increasingly applied. To fabricate these parts, the Ubending process being a common sheet-metal forming process is widely employed. However, the asymmetrical U-bending process lacks researches. Therefore, in this study, the effects of asymmetrical leglength on spring-back characteristics in the U-bending process were investigated by using the finite element method (FEM) and laboratory experiments. Specifically, on the basis of stress distribution analysis, they were clearly clarified and also compared with those in the symmetrical leg-length case. These results revealed that, with asymmetrical leg-length in a U-shaped part, the changes in leg-length on one side did not result in any different spring-back characteristics and the obtained bend angle on the other side compared with the symmetrical U-shaped parts. Furthermore, the effects of leg-length on the spring-back characteristics were confirmed that the spring-back slightly increased as the leg-length increased. Laboratory experiments were performed to validate the accuracy of the FEM simulation results. Based on the bend angles and bend forces, the FEM simulation showed good agreement with the experiments in terms of both the bend angles and bending forces. ฉ Copyright 2016 by SCITEPRESS - Science and Technology Publications, Lda. All rights reserved.
คำสำคัญ
Asymmetry, Leg-length, U-bending Process
ติดต่อสอบถามเพิ่มเติมได้ที่