Identification of material parameters for springback prediction using cyclic tension–compression test

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Phongsai T., Julsri W., Chongthairungruang B., Suranuntchai S., Jirathearanat S., Uthaisangsuk V.

ผู้เผยแพร่: Prince of Songkla University

ปีที่เผยแพร่ (ค.ศ.): 2016

วารสาร: Songklanakarin Journal of Science and Technology (SJST) (0125-3395)

Volume number: 38

Issue number: 5

หน้าแรก: 485

หน้าสุดท้าย: 493

จำนวนหน้า: 9

นอก: 0125-3395

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84994461964&partnerID=40&md5=419187451f7c394cad1c10e17d6cfab0

ภาษา: English-Great Britain (EN-GB)

บทคัดย่อ

In sheet metal forming process, springback is a critical problem for die makers, particularly in case of advanced high strength steels. Therefore, FE simulations were often used to calculate materials deformation behavior and the springback occurrence of formed sheet metals. Recently, the Yoshida–Uemori model, a kinematic hardening model, has shown great capability for describing the elastic recovery of a material. Nevertheless, determination of model parameters is sophisticated for industrial applications. In this work, an AHS steel grade JIS JSC780Y was investigated, in which tension–compression tests were carried out and the procedure of parameter identification was analyzed. Different fitting methods were examined and verified by evaluation of cyclic stress–strain responses obtained from simulations of 1–element model and experiments. The most appropriate parameter set was determined. Finally, hat shape forming test was performed and springback obtained by calculation and experiment was compared. It was found that the introduced procedure could be acceptably applied. © 2016, Prince of Songkla University. All rights reserved.

คำสำคัญ

Material parameters