Analytical study of membrane wetting at high operating pressure for physical absorption of CO2 using hollow fiber membrane contactors

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Tantikhajorngosol P., Laosiripojana N., Jiraratananon R., Assabumrungrat S.

ผู้เผยแพร่: Elsevier

ปีที่เผยแพร่ (ค.ศ.): 2017

วารสาร: Chemical Engineering Research and Design (0263-8762)

Volume number: 126

หน้าแรก: 265

หน้าสุดท้าย: 277

จำนวนหน้า: 13

นอก: 0263-8762

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85031294654&doi=10.1016%2fj.cherd.2017.09.001&partnerID=40&md5=19da094fa56f7edaa52be1e41283c722

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

In the present work, an average membrane wetting ratio at high operating pressure of hollow fiber polyvinylidenefluoride (PVDF) and polytetrafluoroethylene (PTFE) membrane contactors was estimated analytically based on log-normal distribution function. The membrane characteristics, liquid velocity, operating pressure were also considered for the calculation. The simulations were validated with experimental data to confirm the accuracy of the calculated average membrane wetting at high pressure. At the operating pressure of 1 bar, dry modes are observed for both PVDF and PTFE. While the results of PTFE correspond with the dry mode, the partially wetted mode well predicts the results of PVDF at high operating pressure. The increases of liquid velocity and operating pressure show the higher membrane wetting due to the influences of increasing pressure drop in membrane module and lower surface tension of CO2-dissolved water at high operating pressure. Moreover, PTFE provides lower average membrane wetting compared with PVDF since the average membrane wetting ratio from the calculation occurs at higher trans-membrane pressure at the outlet liquid (>1 bar) which can be possible to maintain the dry mode including during the start-up of the process for the highest absorption performance using PTFE. ฉ 2017 Institution of Chemical Engineers

คำสำคัญ

PTFE, PVDF, Wetting ratio