Thermoelectric cooling of electronic devices with nanofluid in a multiport minichannel heat exchanger

Journal article


Authors/Editors


Strategic Research Themes

No matching items found.


Publication Details

Author listAhammed N., Asirvatham L.G., Wongwises S.

PublisherElsevier

Publication year2016

JournalExperimental Thermal and Fluid Science (0894-1777)

Volume number74

Start page81

End page90

Number of pages10

ISSN0894-1777

eISSN1879-2286

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84951335577&doi=10.1016%2fj.expthermflusci.2015.11.023&partnerID=40&md5=be3e15294e645ad32a0252b9b58913d5

LanguagesEnglish-Great Britain (EN-GB)


View in Web of Science | View on publisher site | View citing articles in Web of Science


Abstract

The performance of thermoelectric cooling of electronic devices with nanofluid in a multiport minichannel heat exchanger is experimentally investigated. The Bismuth Telluride (BiTe3) thermoelectric cooler (TEC) with a ΔTmax of 67°C is used to extract heat from the electronic devices, which is a power transistor. The power transistor in the circuit board usually operates with the electric power ranging from 20W to 400 W which is considered as the input power to the TEC. The aluminum oxide (Al2O3)-water nanofluid with volume concentrations of 0.1% and 0.2% is used as the coolant to remove the heat from the hot side of the TEC. The Reynolds number is varied from 200 to 1000. The result showed 40% enhancement in the coefficient of performance (COP) of thermoelectric module for 0.2% of nanoparticle volume concentration. A 9.15% decrement in thermoelectric temperature difference between the hot and cold side has also been observed for nanofluids (0.2 vol.%), which enhanced the module cooling capacity. The enhancement in local Nusselt number is found to be 23.92% for 0.2% of nanoparticles volume concentration when compared with that of water at a Reynolds number of 1000 and at 400 W power input. The migration of nanoparticles due to temperature difference (thermophoresis) from the wall of the minichannel to the center is attributed to be the reason for the higher local Nusselt number at the entrance region. The thermal effectiveness of the cooling system increases with increase in volume concentration which makes the nanofluids as a promising coolant for electronic cooling applications. © 2015 Elsevier Inc.


Keywords

Particle migrationThermoelectric cooler


Last updated on 2023-28-09 at 07:35