PV industry growth and module reliability in Thailand
Conference proceedings article
ผู้เขียน/บรรณาธิการ
กลุ่มสาขาการวิจัยเชิงกลยุทธ์
ไม่พบข้อมูลที่เกี่ยวข้อง
รายละเอียดสำหรับงานพิมพ์
รายชื่อผู้แต่ง: Chenvidhya D., Seapan M., Sangpongsanont Y., Chenvidhya T., Limsakul C., Songprakorp R.
ผู้เผยแพร่: Society of Photo-optical Instrumentation Engineers
ปีที่เผยแพร่ (ค.ศ.): 2015
Volume number: 9563
ISBN: 9781628417296
นอก: 0277-786X
eISSN: 1996-756X
ภาษา: English-Great Britain (EN-GB)
ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์
บทคัดย่อ
The PV applications in Thailand are now installed more than 1.2 GWp cumulatively. It is due to the National Renewable Energy Program and its targets. In the latest Alternative Energy Development Plan (AEDP), the PV electricity production target has increased from 2 GWp to 3 GWp. With this rapid growth, customers and manufacturers seek for module standard testing. So far over one thousands of PV modules per annum have been tested since 2012. The normal tests include type approval test according to TIS standard, acceptance test and testing for local standard development. For type test, the most module failure was found during damp heat test. For annual evaluation test, the power degradation and delamination of power was found between 0 to 6 percent from its nameplate after deployment of 0 to 5 years in the field. For thin-film module, the degradation and delamination was found in range of 0 to 13 percent (about 5 percent on average) from its nameplate for the modules in operation with less than 5 years. However, for the PV modules at the reference site on campus operated for 12 years, the power degradation was ranging from 10 to 15 percent. Therefore, a long term performance assessment needs to be considered to ensure the system reliability. ฉ 2015 COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only.
คำสำคัญ
PV growth in Thailand, PV module Reliability, PV Power degradation, PV Power evaluation
ติดต่อสอบถามเพิ่มเติมได้ที่