Effect of refrigerant type and insulation thickness on refrigeration systems of land and sea vehicles

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Dalkili็ A.S., Celen A., วebi A., Wongwises S.

ผู้เผยแพร่: Postnina Placana V Gotovini

ปีที่เผยแพร่ (ค.ศ.): 2016

วารสาร: Strojni¿ki Vestnik == (0039-2480)

Volume number: 62

Issue number: 4

หน้าแรก: 252

หน้าสุดท้าย: 259

จำนวนหน้า: 8

นอก: 0039-2480

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84963900698&doi=10.5545%2fsv-jme.2015.2969&partnerID=40&md5=41d8ae1c716d558abc9c9f41377bf28e

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

Vehicles are used in the transportation industry to carry temperature-sensitive goods. In fact, they are designed to bear away perishable cartage at specific temperatures. In this study, the cold rooms of a frigoship, railroad car and truck were designed in order to store foods. In addition, the effect of refrigerants and insulation thickness of the cold rooms' refrigeration systems were taken into consideration. In the analysis, R12, R22 and their alternatives of R134a and R410A were selected as refrigerants flowing in the cycle. The evaporator capacity, the condenser capacity, the compressor work, the refrigerant flow rate and the coefficient of performance (COP) of the designed refrigeration systems for each vehicle were determined. It was observed that R134a and R410A had a slightly lower COP and required higher compressor work than R12 and R22 for a condensation temperature. Frigoship, truck and railroad car cold rooms working with R12 had COP values of 2.24, 2.63 and 3.17, respectively. Moreover, the proposed refrigerant R134a can be used in applications with its COP values of 2.16, 2.51 and 3.15 for frigoship, truck and railroad cold rooms, respectively. The influence of the insulation thickness of the wall on evaporator capacity was also investigated. It was observed that the cooling load of the frigoship, railroad car and truck cold rooms decreased 69 %, 68 % and 43 %, respectively, with increase of insulation thickness of the wall from 0.03 m to 0.3 m. ฉ 2016 Journal of Mechanical Engineering. All rights reserved.

คำสำคัญ

Alternative refrigerants, Condenser, COP, Evaporator, Insulation, Refrigeration