Au/C catalysts promoted with Ni for glycerol electrooxidation in alkaline media

Journal article


Authors/Editors


Strategic Research Themes

No matching items found.


Publication Details

Author listPittayaporn N., Therdthianwong A., Therdthianwong S.

PublisherSpringer

Publication year2018

JournalJournal of Applied Electrochemistry (0021-891X)

Volume number48

Issue number3

Start page251

End page262

Number of pages12

ISSN0021-891X

eISSN1572-8838

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85041510676&doi=10.1007%2fs10800-018-1155-9&partnerID=40&md5=6b99ad697ca36b49eca8088e1579a31d

LanguagesEnglish-Great Britain (EN-GB)


View in Web of Science | View on publisher site | View citing articles in Web of Science


Abstract

Abstract: Au/C catalysts promoted by Ni at different Au:Ni atomic ratios (3:1, 2:1, and 1:1) were prepared for glycerol electrooxidation in alkaline media by a polyvinyl alcohol protection method. The catalysts were characterized by X-ray diffraction, transmission electron microscopy, and inductively coupled plasma atomic emission spectroscopy. According to the cyclic voltammogram, Ni enhanced the catalytic activity of gold for glycerol electrooxidation in the alkaline media, although the average particle size of the AuxNiy/C catalysts was slightly larger than that of the Au/C with small cluster formation. The optimum atomic ratio of Au:Ni was found to be 2:1, since the Au2Ni1/C provided the maximum mass current density at approximately 18% higher than did the Au/C. The stability of the Au2Ni1/C also improved, as evidenced by chronoamperometry. These improvements are attributed to the ability of Ni to enhance the OH-adsorbed species on the Au surface, thereby inducing a lower onset potential and helping to remove intermediates from the active site. To reduce cluster formation, the effects of metal sol preparation and metal loading sequence on the catalysts’ performance were further studied at this atomic ratio (2:1). Catalysts with preloading of Ni (Au2/Ni1/C) were found to provide the highest maximum mass current density with comparable decay rates among all the catalysts tested. Graphical Abstract: [Figure not available: see fulltext.]. © 2018, Springer Science+Business Media B.V., part of Springer Nature.


Keywords

Alkaline direct glycerol fuel cellsAuNi/C catalystsMetal sol loading sequence


Last updated on 2023-27-09 at 07:36