Optimization of a solar air heater with phase change materials: Experimental and numerical study

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งMoradi R., Kianifar A., Wongwises S.

ผู้เผยแพร่Elsevier

ปีที่เผยแพร่ (ค.ศ.)2017

วารสารExperimental Thermal and Fluid Science (0894-1777)

Volume number89

หน้าแรก41

หน้าสุดท้าย49

จำนวนหน้า9

นอก0894-1777

eISSN1879-2286

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85026757165&doi=10.1016%2fj.expthermflusci.2017.07.011&partnerID=40&md5=9e59877a372c90ad82430ea394758676

ภาษาEnglish-Great Britain (EN-GB)


ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์


บทคัดย่อ

In this paper, a solar air heater (SAH) with phase change material (PCM)-based energy storage is investigated. Paraffin was placed underneath the absorber plate as the PCM. A transient two-dimensional laminar model was used in the Ansys Fluent 17 software to study the effects of different parameters on the performance of the SAH, such as the air mass flow rate, the amount of paraffin, and the thermal conductivity of the paraffin. The performance of the SAH was optimized by considering two objectives simultaneously: thermal energy efficiency and maximum nocturnal temperature difference between the inlet and the outlet of the SAH. To validate the numerical model, a SAH with a 2-cm paraffin layer and the same dimensions as the numerical model was built and tested. The results of the simulation showed good agreement with the experimental results. ฉ 2017 Elsevier Inc.


คำสำคัญ

energy storagePhase Change Material (PCM)Solar air heater


อัพเดทล่าสุด 2023-18-10 ถึง 07:43