Robust digital control of a class-D amplifier with low switching frequency for vibration generator

Conference proceedings article

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Hanabusa K., Higuchi K., Kajikawa T., Premrudeepreechacharn S., Jirasereeamornkul K.

ผู้เผยแพร่: Hindawi

ปีที่เผยแพร่ (ค.ศ.): 2017

ISBN: 9781509046669

นอก: 0146-9428

eISSN: 1745-4557

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85039949182&doi=10.1109%2fIEECON.2017.8075723&partnerID=40&md5=2dc290e5b74199d3dfbf9cc768999405

ภาษา: English-Great Britain (EN-GB)

ดูบนเว็บไซต์ของสำนักพิมพ์

บทคัดย่อ

In late years a class-D amplifier has been used for a vibration generator and IGBT is often used for the switching element of the class-D amplifier. However, since the switching frequency of IGBT is limited low, it is difficult to make the bandwidth of the class-D amplifier wide. The bandwidth 5 kHz is required by the amplifier for the vibration generator with load impedance 2 -8 ω. In this paper, it is shown that the bandwidth 5 kHz of the class-D amplifier can be realized by applying A2DOF control with the switching frequency 50 kHz. Since the output PWM frequency of a bridge circuit increase twice as much as IGBT switching frequency by using a double carrier PWM generating system, the sampling frequency of a controller can be increased twice as much as the switching frequency, i.e. is 100 kHz. Then the bandwidth 5 kHz of the class-D amplifier for the vibration generator with load impedance 2 - 8 ω can be realized by devising how to design A2DOF control. The controller is implemented in a DSP and it is shown from experiment that the desired performance is attained enough. © 2017 IEEE.

คำสำคัญ

A2DOF digital control, Double carrier PWM, IGBT, Vibration generator