Utilization of pottery stone as a replacing material for vitreous ceramic sanitary ware production: A case study in Khon Kaen, Thailand

Conference proceedings article

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Sirilar P., Srisukhumbowornchai N., Thanakijkasem P., Sirisoonthorn S., Klein G.

ผู้เผยแพร่: Trans Tech Publications

ปีที่เผยแพร่ (ค.ศ.): 2017

Volume number: 718

หน้าแรก: 143

หน้าสุดท้าย: 147

จำนวนหน้า: 5

ISBN: 9783035710045

นอก: 1013-9826

eISSN: 1662-9795

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85001065662&doi=10.4028%2fwww.scientific.net%2fKEM.718.143&partnerID=40&md5=04fcb9964419f2e3f1077f7e3db5a807

ภาษา: English-Great Britain (EN-GB)

ดูบนเว็บไซต์ของสำนักพิมพ์

บทคัดย่อ

The aim of this work was to determine the properties of vitreous ceramic sanitary ware bodies according to the production of Khon Kaen ceramic sanitary ware industry, Thailand. Pottery stone was used as a replacing material in the commercial ceramic sanitary ware body formulation. The cast slurry of seven formulations was prepared by wet milling. The rheological properties (density and torsion viscosity) were investigated before slip casting. The test pieces were fired at 1175, 1200 and 1225ฐC and the physical-mechanical properties (firing shrinkage, flexural strength, and water absorption) were compared. As a result, pottery stone shows a possibility to replace quartz in the production. It could enhance all of the good properties at lower firing temperature. Using of pottery stone could reduce production cost in term of energy fuel by 4.45% when compared with commercial formulation. ฉ 2017 Trans Tech Publications.

คำสำคัญ

Energy fuel, Firing temperature, Materials replacement, Production cost