Properties of sintered bronze-graphite containing natural anhydrite
Conference proceedings article
ผู้เขียน/บรรณาธิการ
กลุ่มสาขาการวิจัยเชิงกลยุทธ์
ไม่พบข้อมูลที่เกี่ยวข้อง
รายละเอียดสำหรับงานพิมพ์
รายชื่อผู้แต่ง: Auechalitanukul C., McCuiston R., Bunlangsup B., Naikorn C., Tapanaun S.
ผู้เผยแพร่: Trans Tech Publications
ปีที่เผยแพร่ (ค.ศ.): 2017
Volume number: 751 KEM
หน้าแรก: 19
หน้าสุดท้าย: 24
จำนวนหน้า: 6
ISBN: 9783035710823
นอก: 1013-9826
eISSN: 1662-9795
ภาษา: English-Great Britain (EN-GB)
บทคัดย่อ
This study examined the effect of natural anhydrite (CaSO4) powder additions on the microstructure and frictional properties of a 95 Bronze - 5 Graphite composite prepared by a powder metallurgy process. Natural anhydrite powder, ranging in content from 2 to 8 weight percent, was added to a premixed bronze powder composed of copper and tin and mixed, before the graphite was added. The powder mixture was compacted into disc shaped samples under a pressure of 500 MPa. The compacted samples were sintered at 750 ฐC for 30 minute in a reducing atmosphere. The green and sintered densities of the samples were measured. A microstructural analysis of the sintered samples was also performed. It was found that the green density of the samples decreased with increased anhydrite content. The sintered densities were lower than the green densities due to sample expansion. A finer microstructure was observed in the samples containing anhydrite. The anhydrite additions resulted in the reduction of both the friction coefficient and wear of the bronze-graphite samples. The amount of anhydrite from 2 to 8 weight percent clearly altered the microstructure of the bronze-graphite samples, however, the level of reduction of the friction coefficient and wear were quite similar among the anhydrite containing samples. ฉ 2017 Trans Tech Publications, Switzerland.
คำสำคัญ
Anhydrite, Bronze
ติดต่อสอบถามเพิ่มเติมได้ที่