Effect of compaction pressure and sintering time on the properties of sintered Cu-10Sn bronze

Conference proceedings article

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Nakrod N., McCuiston R., Auechalitanukul C.

ผู้เผยแพร่: Trans Tech Publications

ปีที่เผยแพร่ (ค.ศ.): 2017

Volume number: 751 KEM

หน้าแรก: 37

หน้าสุดท้าย: 41

จำนวนหน้า: 5

ISBN: 9783035710823

นอก: 1013-9826

eISSN: 1662-9795

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85028715386&doi=10.4028%2fwww.scientific.net%2fKEM.751.37&partnerID=40&md5=b7d81cf1a9304ed5908f7031af05257a

ภาษา: English-Great Britain (EN-GB)

ดูบนเว็บไซต์ของสำนักพิมพ์

บทคัดย่อ

Bronze-based composite materials are well known for use as friction materials. They are produced by powder metallurgy techniques from bronze powder, which acts as a matrix, and various friction modifying additives. The objective of this work was to study the effect of compaction pressure and sintering time on the properties of the unmodified bronze matrix. The bronze powder used was prealloyed with a composition of Cu-10Sn. The specimens were pressed by uniaxial die compaction with pressures of 282 to 339 MPa. The sintering experiments were conducted in an alumina tube furnace at 800 ฐC with sintering times of 30, 45, and 60 min under a vacuum pressure of 2.25x10-2 Torr. From the results, it was found that the density of the samples increased with increasing compaction pressure. A microstructural examination of the samples for the different sintering times showed them to look very similar. Finally, the highest sintered density of 7.30 g/cm3 was obtained at 800 ฐC for 60 min. ฉ 2017 Trans Tech Publications, Switzerland.

คำสำคัญ

Bronze, porosity, Sintering